.

.

0-30 וולט 2מ-3א ערכת אספקת חשמל מתכווננת מווסתת, ממירי חשמל, להגנה על מגבלת זרם קצר

0-30 וולט 2מ-3א ערכת אספקת חשמל מתכווננת מווסתת, ממירי חשמל, להגנה על מגבלת זרם קצר

ILS 62.60

קיים
בחנות

כוונון : מעגל זה הוא ספק כוח מוסדר איכותי ומתכוונן ברציפות עם טווח ויסות מתח של 0-30 וולט הוא כולל גם מעגל הגבלת תפוקה נוכחית לשליטה יעילה על זרם התפוקה המרבי, המתכוונן ברציפות מ-2 מיליאמפר עד 3 א. שימוש בטוח : הוא יכול להגביל את הזרם של זרם העבודה המרבי האופייני במעגל הניסוי, להפעיל באומץ את ספק הכוח, ואל תדאג לגבי הכשל או שגיאת ההתקנה הנגרמת על ידי נזק הזרם הגבוה למעגל הניסוי. קל להתאים : את פלט מתח הוא קל להתאים. את פלט הנוכחי גבול מצב מסומן על ידי נוריות. כאשר פלט הנוכחי עולה על גבול הנוכחי, זה יהיה באופן אוטומטי לעבור את מצב זרם קבוע, עומס יתר או מסוגל לספק הגנה מלאה. ביצועים יציבים : למרות את מיתוג אספקת חשמל יש את היתרונות של יעילות גבוהה וגודל קטן, זה יהיה בהכרח להישאר גבוהה-תדר הפרעות, ואילו ליניארי אספקת חשמל יש מאוד נמוך הפרעות ובידוד טוב. מידע על המוצר : 1 לוח אספקת חשמל במתח מיוצב, 1 נגד סרט מתכת תוסף, 2 כרטיסי זיהוי התנגדות, 1 קבל אלקטרוליטי תוסף+נגד מלט+מסוף+מושל, 1 כבל+כבל+קבל קרמי+קבלים מונוליטיים, 2 מחברים, כלים מלאים. גודל מעגלים מודפסים : כ 84 על 84 מ מ/3. מפרט : מצב : 100% מותג New Item סוג : מוסדר אספקת חשמל Board Color : Red Input מתח : 24 V AC (מקסימום)קלט נוכחי : 3א (מקסימום)תפוקה מתח : 0-30 V ברציפות adjustable Output הגבלת הנוכחי : 2m A-3 A ברציפות adjustable Output מתח אדווה : 0.01% (מקסימלי)גודל מעגל מודפס : Approx.31 רשימת חבילות : 1 על לוח אספקת חשמל מוסדר1 על סט של נגד סרט מתכת פלאג - אין 2 על כרטיס זיהוי התנגדות 1 על סט של קבל אלקטרוליטי פלאג - אין + התנגדות מלט + מסוף + מושל 1 על סט של כבל + כבל + קבל קרמי + קבלים מונוליטיים2 על מחבר הערה : 1.

המאפיינים האחרים

Condition:
100% Brand New
Item Type:
Regulated Power Supply Board
Color:
Red
Input Voltage:
24V AC (maximum)
Input Current:
3A (maximum)
Output Voltage:
0-30V continuously adjustable
Output Limiting Current:
2mA-3A continuously adjustable
Output Voltage Ripple:
0.01% (maximum)
PCB Size:
Approx.84x84mm/3.31x3.31in
Package List:
1 x Regulated Power Supply Board1 x Set of Plug-in Metal Film Resistor2 x Resistance Identification Card1 x Set of Plug-in Electrolytic Capacitor + Cement Resistance + Terminal + Governor1 x Set of SCR + IC + Cable + Ceramic Capacitor + Monolithic Capacitor2 x Connector
Note:
1. The radiator and fan are not included in the kit. You can bring it yourself or buy it in the store. There is an external 24V cooling fan connector on the board. The adjustment tube of this circuit must be added with a sufficiently large radiator or fan to operate with load, remember! Otherwise, the adjustment tube may be damaged due to overheating.2. The potentiometer can be directly soldered to the board, or it can be led to the panel installation. The kit is equipped with connecting sockets and connecting wires.3. The power transformer uses 24V AC output (or dual 12V, the center tap is empty, not higher than this voltage), the power can be selected according to need, if you need 30V 3A output, the transformer power needs to be greater than 90W.4. The power supply is a high voltage and high current circuit, please be careful, otherwise it may cause harm to physical safety! This shop only guarantees the correctness of the kit and circuit, and does not bear any adverse consequences caused by the production!

הצעות דומות