מלטש מסלול אוויר, מכונת ליטוש אקסצנטרית AT-1500R48 סטיה עמידה 3 ממ מלטש אוויר לרכב המפרט ליטוש לשעווה לרכב

המאפיינים האחרים

Condition:

100% Brand New

Item Type:

Pneumatic Grinding Machine

Material:

stainless steel

R48 Models:

the AT - 1500

No-Load Speed:

15,000 RPM

Air Inlet Size:

1/4 inch

Compressed Air Flowing Rate:

8CFM

Exhaust Direction:

Rear exhaust

Gas Interface Screw:

1/4-19NPT

Noise Value:

Less than 83DB

Recommended Airway Diameter:

6.3 (mm)

Classification:

Oscillating pneumatic eccentric sander

Eccentric Pneumatic grinder Refueling tips:

1. The machine is highly precise, in the operation, high speed, any fine sand, iron chip once into the movement, may lead to blade breakage, causing machine failure, so be sure to ensure air inlet.:

2. The oil-water separator must be used and the water should be drained regularly to ensure the machine is dry.:

3. Every day before use must add 3 to 5 drops of pneumatic oil in the machine inlet, connected to the air pump for idling.:

Eccentric pneumatic grinding machine Plate change need to know:

1 Find the keyhole.:

2. Insert the locating pin into the keyhole and keep the pin still.:

3. Turn right and replace the sand pad.:

Package List:

1 x Polisher3 x Polishing Disc :

9 x Flat Sponge Pad :

9 x Wavy Sponge Pad :

3 x Microfiber Pad:

6 x Artificial Wood Pad :

15 x Sand Paper :

1 x Location Lock :

1 x 1/4 Inlet Connection :